jessamynlee@vornetvalve.com+86 178 8819 0118 · EN
REQUEST A QUOTE

OIL & GAS LONG-DISTANCE PIPELINES

Valve applications from pipeline origin to terminal.

Explore isolation, protection and flow-control requirements across long-distance oil and gas transmission systems.

EXPLORE APPLICATIONSDISCUSS YOUR PROJECT

APPLICATION OVERVIEW

Four critical parts of the oil & gas pipelines process.

01PUMP & COMPRESSOR STATIONSVIEW APPLICATION →02MAINLINE BLOCK ISOLATIONVIEW APPLICATION →03PIG LAUNCHING & RECEIVINGVIEW APPLICATION →04METERING, TERMINALS & STORAGEVIEW APPLICATION →
01PUMP & COMPRESSOR STATIONS

PUMP & COMPRESSOR STATIONS

Protect rotating equipment and maintain throughput.

Pump and compressor stations provide the pressure needed to move crude oil, products and natural gas over long distances.

WHERE IT IS USED
  • Pump suction and discharge
  • Compressor isolation
  • Recycle and bypass lines
  • Station inlet and outlet
APPLICATION CHALLENGE

High flow velocity, vibration and rapid shutdown events can create reverse flow, surge and excessive valve loads.

VORNET APPROACH

Full-bore isolation valves and fast-acting check valves are configured around station operating and emergency shutdown sequences.

RECOMMENDED VALVE TYPESValves selected for this application
CLICK TO VIEW PRODUCTS
Trunnion Ball Valve industrial valveTight shutoffTrunnion Ball ValveBall ValvesFast quarter-turn isolation with reliable bubble-tight sealing.VIEW CATEGORY →Through-Conduit Gate Valve industrial valveIsolationThrough-Conduit Gate ValveGate ValvesFull-bore isolation with low pressure loss for critical process lines.VIEW CATEGORY →Check Valve industrial valveBackflow protectionCheck ValveCheck ValvesAutomatic reverse-flow protection for pumps and process equipment.VIEW CATEGORY →
02MAINLINE BLOCK ISOLATION

MAINLINE BLOCK ISOLATION

Section the pipeline quickly and reliably.

Block valve stations limit inventory release and allow pipeline sections to be isolated for inspection, maintenance or emergencies.

WHERE IT IS USED
  • Mainline block stations
  • River and road crossings
  • Branch connections
  • Remote isolation points
APPLICATION CHALLENGE

Valves may remain static for years yet must operate reliably under full differential pressure when required.

VORNET APPROACH

Full-bore ball or slab gate valves with stem sealing, cavity relief and suitable actuation support dependable remote isolation.

RECOMMENDED VALVE TYPESValves selected for this application
CLICK TO VIEW PRODUCTS
Trunnion Ball Valve industrial valveTight shutoffTrunnion Ball ValveBall ValvesFast quarter-turn isolation with reliable bubble-tight sealing.VIEW CATEGORY →Slab Gate Valve industrial valveIsolationSlab Gate ValveGate ValvesFull-bore isolation with low pressure loss for critical process lines.VIEW CATEGORY →Emergency Shutdown Actuator industrial valveEngineered serviceEmergency Shutdown ActuatorSpecial ValvesApplication-specific valve configuration for demanding operating conditions.VIEW CATEGORY →
03PIG LAUNCHING & RECEIVING

PIG LAUNCHING & RECEIVING

Enable safe inspection and pipeline cleaning.

Pig traps and bypass manifolds allow cleaning, batching and in-line inspection tools to enter and leave the pipeline.

WHERE IT IS USED
  • Launcher barrel isolation
  • Receiver barrel isolation
  • Kicker and bypass lines
  • Vent and drain connections
APPLICATION CHALLENGE

Sequence errors, trapped pressure and debris can compromise safe opening, closing and pressure equalization.

VORNET APPROACH

Full-opening isolation valves and clearly defined vent, drain and bypass valve arrangements support safe pigging procedures.

RECOMMENDED VALVE TYPESValves selected for this application
CLICK TO VIEW PRODUCTS
Full-Bore Ball Valve industrial valveTight shutoffFull-Bore Ball ValveBall ValvesFast quarter-turn isolation with reliable bubble-tight sealing.VIEW CATEGORY →Gate Valve industrial valveIsolationGate ValveGate ValvesFull-bore isolation with low pressure loss for critical process lines.VIEW CATEGORY →Vent & Drain Valves industrial valveThrottlingVent & Drain ValvesGlobe ValvesStable flow regulation and dependable shutoff under demanding service.VIEW CATEGORY →
04METERING, TERMINALS & STORAGE

METERING, TERMINALS & STORAGE

Control custody transfer and terminal routing.

Metering stations and terminals route product between pipelines, storage tanks, loading systems and customer connections.

WHERE IT IS USED
  • Meter runs
  • Tank farm manifolds
  • Loading and unloading
  • Pressure and flow control
APPLICATION CHALLENGE

Accurate routing, low internal leakage and repeatable control are essential for product quality and custody transfer.

VORNET APPROACH

Tight-shutoff ball valves, double-isolation arrangements and control valves support dependable switching and measurement.

RECOMMENDED VALVE TYPESValves selected for this application
CLICK TO VIEW PRODUCTS
DBB Ball Valve industrial valveTight shutoffDBB Ball ValveBall ValvesFast quarter-turn isolation with reliable bubble-tight sealing.VIEW CATEGORY →Control Valve industrial valveProcess controlControl ValveControl ValvesPrecise modulation of flow, pressure and temperature in process loops.VIEW CATEGORY →Check Valve industrial valveBackflow protectionCheck ValveCheck ValvesAutomatic reverse-flow protection for pumps and process equipment.VIEW CATEGORY →

OTHER INDUSTRIES

Explore more Vornet applications.

Metallurgical→Petroleum→Power & Energy→Coal Chemical→Chemical→Hydrogen Energy→Offshore & Marine→

APPLICATION SUPPORT

Tell us where the valve will work.

Share the process area and project requirement. Vornet will review the application and recommend a suitable valve configuration.

jessamynlee@vornetvalve.com